How To Download The Needed Files - Epson PowerLite 1705c Product Support Bulletin

EPSON
06/07/2007
Date:
PSB.2007.06.002
PSB #:
Reference: TI 07-01e Rev. A
Product(s): PowerLite 1705c / 1715c / 1815p
Release of EasyMP Firmware V.1.10 for USB Display support under Windows
Subject:
Vista™ operating system.
This bulletin was created to inform you about the release of PowerLite 1705c / 1715c / 1815p
EasyMP firmware V.1.10 for the USB Display feature to work in Windows Vista. This bulletin
also provides instructions on where to find the firmware upgrade files and how to perform the
upgrade using a USB Thumbdrive.
Description of Change:
Main improvements and limitations by this upgrade are as follows:
Software Version
USB V.1.10
Display

How to download the needed files

Please download the firmware file and update instructions from the Epson PowerLite 1705c or
1715c product support web sites at:
You can download the EasyMP firmware after agreeing to the EPSON END USER LICENSE
AGREEMENT.
How to distinguish new version products from old version ones
You can confirm the version number in the portal screen of EasyMP.
P S
RODUCT UPPORT
Applicable
models
PowerLite1705c /
1715c
PowerLite 1815p
http://support.epson.com
B
ULLETIN
The improvements and limitations
[Improvements]
• Support Windows Vista.
• Add the function which shows ESSID and
hides ESSID on the portal screen of EasyMP.
• Support WEP shared Key Authentication.
[Limitations]
• There are unreadable fonts such as "2" in a
user interface.
• USB Display does not redraw the sent image
until UAC (User Account Control) is shown
on PC.
• The displayed image is an image which is
not with Windows Vista Aero.
• When using Windows Media Center and
Windows photo gallery with full screen, the
USB Display feature cannot display the
images of a full screen to a projector.
Page 1 of 5
PSB.2007.06.002
Originator: TC
Authorization:
Total Pages: 5