Panel Functions; Printer Condition And Panel Status - Epson Stylus PHOTO 820 Service Manual

EPSON Stylus PHOTO 810/820

1.4.2 Panel Functions

Table 1-15. Panel functions
Switch
• Loads or Ejects the Paper (Pushing within 3seconds).
• Starts the Cleaning of head (Pushing for 3seconds).
Error reset SW
• When carriage is on the Ink Cartridge change position, return
carriage from Ink cartridge change position.
• Starts the Ink Cartridge change sequence. *
Ink cartridge
exchange SW
* This function is not available in printing status.
Table 1-16. Panel functions with power on
Switch
• Start status printings.
Error reset SW
• Selects IEEE 1284.4 mode for parallel I/F. *1
Ink cartridge
exchange SW
*1 Not described in the user's manual.
PRODUCT DESCRIPTION
Function
Function
PANEL CONTROL

1.4.3 Printer Condition and Panel Status

Table 1-17. Printer condition and LED status
Printer status
Power
Power ON condition
Ink sequence
Ink cartridge change mode
Data processing
Paper out *1
Paper jam condition *1
Ink end (Black) *1
Ink level low (Black)
Ink end (Color) *1
Ink level low (Color)
Ink end (Black and Color)
No ink cartridge
(Black and Color) *1
Maintenance request
(Ink overflow counter Alt Blink
error) *1
Fatal error *1
Special setting Blink2
" - " : Indicator status don't change.
" A -> B " :A is a indicator condition when carriage is in Home Position.
B is a indicator condition in Ink exchange sequence.
*1: refer to 1.4.4 "Error Status"or detailed information.
Blink : On 0.5sec + Off 0.5sec
Blink2 : On 0.2sec + Off 0.2sec + On 0.2sec + Off 0.4sec
Revision A
Indicators
Error
On -
Blink -
Blink -
Blink -
- On
- On
- On -> Blink
- Blink-> Blink
- On -> Blink2
- Blink-> Blink2
- On -> On
- On
Alt Blink
Off On
Blink2
Priority
10
6
5
9
4
3
8
8
8
8
8
7
2
1
-
25