Tear-Off Function; Adjust Lever Operation; Figure 1-11 Lever Positions - Epson SQ-1170 Service Manual

When the paper is at the top-of-form position, the loading position is adjustable by using the 'MICRO
FEED' function. In the 'MICRO FEED' function, pushing the LINE FEED button pushes the paper forward,
and pushing the FORM FEED button pulls the paper backward.
The adjusted loading position is stored into the memory and remains to be effective until the power
is turned off. But the adjusted loading position of the continuous paper is memorized into nonvolatile
RAM, so it remains effective even if the power is turned off.

Tear-off Function

By pressing the TEAR OFF button when the tractor feed is selected, the paper is advanced to the tear
off position and 'TEAR OFF' indicator is lit.
In this condition (tear off condition), the tear off position is adjustable by using the 'MICRO FEED'
pushing the FORM FEED button pulls the paper backward.
The adjusted position is memorized into the nonvolatile RAM and remains effective even if the power
is turned off.
If necessary to cancel this function, press the TEAR OFF button again or press the
send subsequent data to the printer. Then the paper is fed back to the top-of-form

1.6.10 Adjust Lever Operation

The adjust lever must be set to the proper position according to the type of paper
Table 1-16. Lever Positions
Lever Position
Front
side
Rear side
I

Figure 1-11 Lever Positions

1-23
Paper Type
Envelope
Cut sheet
I Continuous
PAUSE button or
position.
used.