Initial Start-Up; Registering Your Lifebook Notebook; Booting The System - Fujitsu Lifebook NH570 Getting Started Manual

Initial Start Up
Display Cover
DC Power Jack
DC output Cable
AC Adapter
LAN Jack
HDmI Port
Wireless LAN/Bluetooth
on/off Switch
AC Cable
Power/Suspend/Resume
Button
1. open the Display Panel
• Ensure that your LifeBook is on a hard level surface and that
the air vents are not blocked.
• Lift the display, being careful not to touch the screen.
• Adjust the display until it is at a comfortable viewing angle.
2. Connect AC Power
• Plug the AC adapter into your notebook.
• Plug the power cord into the AC adapter.
• Connect the power cord to an electrical outlet.
3. Connect to Internet or Network
• Connect an Ethernet cable to the LAN jack on your notebook and
to a wall jack, or connect to a wireless Ethernet router by sliding
the wireless LAN switch to on.
Important:
• During the setup procedure, do not disconnect the power
supply, press any buttons, or use any peripheral devices
such as a mouse, keyboard, or remote control.
• You should not attach any external devices and do not put a
DVD/CD in your drive until you have gone through the initial
power on sequence.

4. Booting the System

The Lithium ion battery is not charged upon purchase.
Initially you will need to connect either the AC adapter
or the Auto/Airline adapter to use your notebook.
• Press the Power Suspend/Resume button (above the keyboard)
to turn on the notebook. When you do this for the first time,
it will display a Fujitsu logo on the screen. If you do nothing,
the system will load the operating system, and then the
Windows Welcome will begin.
5. Register
• Accept the Microsoft
®
Fujitsu End User License Agreement to proceed.
• Select your User ID and Password during the "Welcome Screen."
• Keep a record of your User ID and password stored in a secure place.
• THE SCREEN WILL GO DARK FOR APPROXIMATELY TWO
MINUTES. DO NOT ATTEMPT TO TURN POWER ON OR
OFF DURING THIS STAGE.
6. Registering Your LifeBook
notebook
• Register your notebook with Fujitsu Service and Support via our
website at us.fujitsu.com/computers.
• You will need to be set up with an Internet Service Provider (ISP)
to register online.
7. Installing Click me!
It is critical that you run ClickMe! to install
necessary applications, utilities and drivers.
• To verify a successful installation, the application icons will appear
on the desktop. This process can take up to 15-20 minutes.
• Check to be sure the LifeBook is connected to the Internet via the
WLAN switch being on or connected to a LAN.
• After the first boot, a dialog box will automatically open that
prompts you to run Click Me!. If you choose not run ClickMe!
at this time, the ClickMe! icon will remain on your desktop.
• When you click the Click Me! icon, your system will automatically
build the icon tray in the bottom right of the screen. Other utilities
(e.g. Bluetooth) and drivers may be installed. Icons will be created
that provide links to application/utilities that you will frequently
access. Once Click Me! is completed the system will reboot.
Windows Licensing Agreement and the
®
Additional
Applications
and Utilities)
"Click me!"
(For
(For
Latest
Drivers)
(FDU)
3