Duerkopp Adler 550-16-26 Operating Instructions Manual page 8

4.5 Winding the Hook Thread
4 3
–
Slip the bobbin onto the bobbin winder 2.
–
Pull the thread through the guide 3 and the tension 4.
–
Wind the thread clockwise about 5 times around the bobbin core
and tear off at the thread clamp.
–
Swing the bobbin winder lever 1 towards the bobbin .
–
Sewing
The bobbin winder lever will stop the winding process as soon as
the bobbin is full.
ATTENTION !
If the thread is not to be wound during sewing,
it is essential to arrest the sewing foot in the raised position.
(See chapter 4.10)
2 1
1
11