Configuring the Administrator Account
Password
Confirm Password
To add an administrator account, follow these steps:
1.
Log on to the web interface.
2.
On the menu under General, click Administrator Accounts. The Administrator Accounts page is
displayed.
3.
Click "Add User". The Add an Administrator page is displayed.
4.
Complete the fields as described below.
5.
Click OK. The message "Administrator Account Added" is displayed.
http://albatross.rose.hp.com/~lindsay/pdfs/english/adminact.htm (4 of 5) [6/22/2001 11:25:51 AM]
Enter the password. The password is case sensitive and can contain
alphanumeric characters and the following special characters:
~ ` ! @ $ % ^ ( ) - _ { } ..
Note: The appliance will accept a null or blank password.
Enter the password again to confirm it (if there is a password). Then click OK
to add this administrator to the appliance.