Paper Handling Specifications - Epson LQ-670 Service Manual

1.2.3 Paper Handling Specifications

‰Feeding method
‰Feeder
‰Paper path

‰Line Spacing
‰Feed speed
‰Release Lever
‰Paper thickness lever :The paper thickness lever must be set at the proper position according to the
1/6 inch feed
Continuous feed
Lever Position
Friction
Tractor
Lever Position
0
1
2
3
4
5
6
Rev. A
:Friction feed
Push tractor feed
:Rear push tractor
CSF Bin1/Bin2 (Option)
Roll paper holder(Option)
:Manual Insertion Front in, front out
CSF Rear in, front out
Tractor Rear in, front out
:1/6 inch or programmable in increments of 1/360 inch
:Refer to the table 1-4.
:The release lever must be set according to the table 1-5.
table 1-6.
Table 1-4. Feeding Speed
Normal mode
60 msec
0.127MPS(m/sec)
5.0 IPS(inches/sec)
Table 1-5. Release Lever Position
Paper path/Feeder
Manual insertion(front)
CSF Bin1
CSF Bin2
Roller paper holder
Push tractor feed(rear)
Table 1-6. Paper Thickness Lever Position
Paper thickness (inch)
Minimum Maximum
0.0024
0.0047
0.0075
0.0102
0.0126
0.0142
0.0157
Chapter 1 Product Description
(front manual, rear CSF)
(rear)
70 msec
0.092 MPS(m/sec)
3.6 IPS(inches/sec)
Cut sheet(Single sheet& Muti part)
Card
Cut sheet(Single sheet & Multi part)
Envelope, Card
Cut sheet(Single sheet)
Roll paper
Continuous paper(Single sheet & Multi
part)
Paper thickness (mm)
Minimum
0.0047 0.065
0.0075 0.12
0.0102 0.19
0.0126 0.26
0.0142 0.32
0.0157 0.36
0.0205 0.40
Copy mode
Paper/Media
Maximum
0.12
0.19
0.26
0.32
0.36
0.40
0.52
1-5