Epson LQ-1170 Service Manual page 113

Ref. No.
1/4 of the perimeter of the top edge of the gear (8.5 mm, 30 mm)
2
4 Portion of carriage that contacts base frame
5 Oil pad
Gear (40 mm) shaft
7
Portion of paper guide that contacts sub paper guide
8
10 Portion of tractor shaft that contacts tractor frame (left)
11 Ribbon planetary lever
NOTE: Lubrication must be applied during the reassembly process.
Table 6-3. Adhesive Application Point (Refer to Figure 6-l.)
Portion where timing belt engages the
carriage
Table 6-2. Lubrication Points (Refer to Figure 6-2)
Lubrication Points
Adhesive Application Point
Figure 6-1. Correct Adhesive Application
No. of Points
6-2
Lubricant
G-26
G-26
G-26
G-26
o-2
G-26
G-26
G-26
G-26
G-26