Control Panel Buttons POWER / = Power On / Off = Volume - / Volume + - P / P + = Program - / Program + Front AV input AUDIO L / R = Audio left (white) / right (red) Front AV VIDEO = VCR (yellow) Connect Peripheral Equipment...
Search for and store the test signal of the Connect Peripheral Equipment video recorder There is a wide range of audio and video equipment that can be connected to your TV. • Unplug the aerial cable from the aerial socket “ A NT” of your video recorder.
Preparation Safety Precautions Place the TV on a solid surface. IMPORTANT SAFETY INFORMATION ON If placing the TV into a cabinet or alcove, ensure there is at least OPERATING YOUR TV a 100mm (10cm) gap to the sides and rear and top of the TV. This is to allow for adequate ventilation during operation.
7. Servicing ABOVE ALL Please refer all servicing to qualified personnel. Do not remove • NEVER let anyone, especially children push anything into the back cover as this may result in an electric shock. holes, slots or any other opening in the case - this could result in a fatal electric shock.
Before Switching on your TV Switching the TV ON/OFF Power connection To switch the TV on IMPORTANT: The TV set is designed to operate on 220-240V Your TV will switch on in two steps: AC, 50 Hz. 1- Press the power button located on the front of the TV. Then •...
"P<P" button, programme 8 will be selected. If you press the Operating with the buttons on the TV set same button again, programme 2 will be selected and so on. Volume setting and programme selection can be made using the buttons on the front panel. Volume Setting •...
Page 10
Setting Effect • Press “ ” button to increase volume. You can use this feature to switch the sound effect on and off. • Press “ ” button to decrease volume. Pressing “ ” or “ ” button will turn on and off this feature. If the Or you can directly change the volume settings using “...
Setting Sharpness • Using “ “ or “ ” button select Sharpness. VOLUME BALANCE • Press “ ” button to increase sharpness. MODE MONO EFFECT • Press “ ” button to decrease sharpness. EQUALIZER STORE Picture Menu • To enter the Picture menu directly, press the “GREEN” button, •...
the Install menu pressing “ ” or “ ” button. Sleep Timer As you enter the Feature menu, SLEEP TIMER will be the first Selecting Programme selected option. Use “ ” or “ ” button to change the Sleep Timer values between OFF, 0:15:00, 0:30:00, 0:45:00, 1:00:00, To select programme number, you can use “...
After changing the name by pressing the RED button (STORE) Programme Menu it is stored. After activating the name process the “INSERT”, • To enter Programme menu directly, press the " " button, “DELETE” and “AUTOSTORE” processes will be inactive and "CANCEL"...
Other Features If dual broadcast detected. Dual I is selected in default and also TV Status can be selected after Dual II by Remote Control. Programme Number, Programme Name (or AV), (they are displayed on the upper left of the screen) and Sleep Timer If Dual II selected by Remote Control.
AV Modes Searching for a page while watching TV • While Teletext Mode is on, pressing “ ” will change the By pressing the “ “ button you can switch your TV to AV V mode to TV, one more press to “ ”...
Tips • Press “ ” button to move the Teletext screen forward one page at a time. Care of the Screen • Press “ ” button to move the Teletext screen backward one Clean the screen with a slightly damp, soft cloth. Do not use page at a time.
Specifications TV BROADCASTING PAL B/G RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND CABLE TV (S1-S20 / S21-S41) NUMBER OF PRESET CHANNELS 100 CHANNEL INDICATOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERATING VOLTAGE 220-240V AC,50 Hz. AUDIO OUTPUT German Stereo AUDIO OUTPUT POWER (W...
Page 18
Fax: +46 (0) 8 562 711 13 Tel: +39 02 38073415 Servizio Clienti Email: csgswe@hitachi-eu.com Fax: +39 02 48786381/2 Email: customerservice.italy@hitachi-eu.com HITACHI EUROPE LTD (Norway) AB HITACHI EUROPE S.A.S Lyon Office STRANDVEIEN 18 B.P. 45, 69671 BRON CEDEX 1366 Lysaker...