Table of Contents
Advertisement
3.
A ports window will appear. Click "Use
the following port and select the
appropriate local port for the printer
(Parallel, USB) from the list (Win2000) or
pull-down menu (WinXP) and click Next.
If installing as a TCP/IP network printer,
select "LPT1:" at this point After the
installation, refer to the
section
of Chapter 8 of this Manual
(Networking the Elite 21 Series Printer)
for instructions on configuring the printer
as a network device.
4.
A list of manufacturers and printer models
will appear. Insert the Elite 21 Series CD-
ROM in the CD drive of your computer
and click Have Disk.
5.
This will bring up the Install From Disk
window. Use the Browse button to select
your Elite 21 Series CD-ROM. Open the
folder on the CD that corresponds to the
language being used (English, French,
German, Italian or Spanish). Open the
Win2000-XP folder within this folder.
Select the GCCE21.INF item in this folder.
Click Open, then click OK.
Windows 2000/XP
5-7
Advertisement
Table of Contents
