Duerkopp Adler 528 Instruction Manual page 16

Note: 1. For permanent memory storing of changed pa-
rameter, it is necessary to press treadle forwards
down after changing of parameters.
2. Mode of changing parameters is possible only af-
ter finishing of the seam.
Number of stitches in bars:
Number of stitches is stored in parameter's number.
No. of parameter Value range
of parameter
000(080) 0-254
001(081) 0-254
002(082) 0-254
003(083) 0-254
The drive with the panel V 820 enables sewing automatically
up to 40 seams distributed up into eight programmes with the
given stitch numbers and sewing direction (forwards/rear-
wards). For more detailed information see the original driving
instructions.
12
Description
of parameters
Number of stitches of
start (fancy) bar forwards
Number of stitches of
start (fancy) bar backwards
Number of stitches of
end (fancy) bar backwards
Number of stitches of
end (fancy) bar forwards