Lenovo ThinkCentre M92z User Manual page 83

1. Open the mouse battery-compartment cover.
3. Connect the USB dongle to any USB connector on
the computer.
5. Close the mouse battery-compartment cover and
slide it forward until it clicks into place.
Notes:
– The green LED indicates that the mouse is ready for use.
– The flashing amber LED indicates a low battery power level.
– Push the power switch to the off position when you are not using the mouse. This extends the
battery life.
– Disconnect the USB dongle from your computer and store it in the wireless mouse compartment or in
the wireless keyboard compartment when not in use.
2. Remove the USB dongle from the mouse.
4. Insert two AAA batteries into the mouse according
to the polarity indicators.
6. Slide the power switch on the mouse to the On
position and the LED (light-emitting diode) is on.
.
Chapter 5 Installing or replacing hardware
71