Lenovo ThinkCentre M92p User Manual page 65

To install the solid state drive, do the following:
1. Install the solid state drive into the adapter. Then, install the four screws to secure the solid state
drive to the adapter.
Figure 36. Installing the solid state drive into the adapter
2. To install the solid state drive with the adapter into the 3.5-inch hard disk drive bracket, flex the bracket
1
and align pin , pin
Figure 37. Installing the solid state drive with the adapter into the hard disk drive bracket
3. Connect the signal cable and the power cable to the solid state drive.
4. Install the solid state drive into the hard disk drive bay. See "Replacing the hard disk drive" on page 54.
2 3 4
, pin , and pin on the bracket with the corresponding holes in the adapter.
.
Chapter 5 Installing or replacing hardware
53