Setting The Delay Timer; Switching Off The Dishwasher - AEG FAVORIT 44080 i User Manual

Setting the Delay Timer

Using the delay timer you can delay the start of a dishwashing cycle for 3, 6 or 9
hours.
1. Press the ON/OFF button.
2. Press the Delay Timer button repeatedly until the indicator next to the number
of hours for which the start of the dishwashing cycle is to be delayed lights up,
e. g. , if the cycle is to start in 6 hours.
6h
3. Select dishwashing cycle.
The LED indicator for the programme selected and the indicator next to the
number of hours will light up.
The dishwashing cycle will start automatically following a countdown of the
hours set.
To change the time delay:
As long as the cycle has not yet started, you can still change the setting by
pressing the DELAY TIMER button.
Cancelling the delay timer:
Press the DELAY TIMER button repeatedly until none of the three time displays is
lit. The selected dishwashing cycle will begin immediately.
To change a dishwashing cycle
As long as the cycle has not yet started, you can still change the dishwashing
cycle. First abort the dishwashing cycle, then re set the time delay, lastly select
the new dishwashing cycle.

Switching off the dishwasher

Do not switch off the dishwasher until the indicator for the end of the dish
washer cycle is illuminated in the cycle progress display.
1. Press the ON/OFF button. All display indicators will go out.
2. Turn off the water tap.
Carefully open the door. Hot steam may escape.
• Hot dishes are sensitive to knocks. Therefore leave the dishes to cool for about
15 minutes before removing them. You also get a better drying result.
• Dishes dry more quickly if you open the door for a moment after the cycle has
ended and then leave it slightly open.
Removing the dishes
It is normal for the inner door and the dispensers to be damp.
• Empty the lower basket first, then the upper basket. This way you avoid drip
ping water from the upper basket onto dishes in the lower basket.
23
In daily use