Canon PIXMA MP980 Manual page 19

Downloading and Installing the Drivers
Step Nine
On the Connection Performance Measurement screen,
click Next.
Measuring of the communication status starts, and the
results are displayed.
Measuring takes a few minutes. You can cancel
measuring by clicking Cancel. You also examine the
detailed status of the communication link after setup by
using the Canon IJ Network Tool.
Step Ten
Confirm the measurement results, then click Finish.
Ensure that is displayed in Connection performance between the printer and the
access point
If any symbol other than is displayed, refer to displayed comments and Help for
improving the status of communication link.
To check whether the new location is better, click Remeasurement. Measurement of
the communication status is performed again.
When any message on Overall network performance appears in the measurement
results, rearrange the printer and other network devices following the instructions on
the screen.
<< Previous Next >>
19