Lcd Module - Toshiba Satellite M30X Maintenance Manual

4.18 LCD Module

Removing the LCD Module
To remove the LCD module, first remove the display assembly and display mask, then follow the
steps below.
1. Remove two M2x3 black screws securing the LCD cable and FL inverter board.
2. Disconnect the LCD cable from the FL inverter board.
3. Remove two M2.5x5 black screws securing the LCD module bracket to LCD cover.
Satellite M30X Series Maintenance Manual
Figure 4-29 Removing the LCD module-1
4 Replacement Procedures
4-45