Brother HL-3140CW User Manual page 98

General Information
Network Menu for HL-3150CDN
Submenu 1 Submenu 2
Boot Method -
TCP/IP
IP Address -
Subnet Mask -
Gateway
IP Boot Tries -
APIPA
IPv6
-
Ethernet
Wired Status -
MAC Address -
Network Reset Restores all network settings of the internal print server to the factory default.
The factory settings are shown in Bold with an asterisk.
1
### means a number within the range of 000 to 255. On connection to the network, if the machine's 'Boot Method' is 'Auto' the machine will attempt
to set the IP address and Subnet Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will
be allocated, such as 169. 254. [001-254]. [000-255]. If the 'Boot Method' of the machine is set to 'Static' you will need to manually enter an IP
address from the machine's control panel.
Menu Selections Options
Auto* / Static / RARP /
BOOTP / DHCP
###.###.###.###
(000.000.000.000)*
###.###.###.###
(000.000.000.000)*
-
###.###.###.###
(000.000.000.000)*
0 / 1 / 2 / 3* / ... / 32767
- On* / Off
- On / Off*
- Auto* / 100B-FD /
100B-HD / 10B-FD /
10B-HD
- Active 100B-FD /
Active 100B-HD /
Active 10B-FD /
Active 10B-HD /
Inactive / Wired OFF
- -
Descriptions
Chooses the IP method that best
suits your needs.
Enter the IP address.
1
Enter the Subnet mask.
1
Enter the Gateway address.
1
Specifies the number of
attempts the machine will try to
obtain an IP address when the
Boot Method is set to any
setting except Static.
Automatically allocates the IP
address from the link-local
1
address range.
Sets use of IPv6 protocol.
Chooses Ethernet link mode.
Shows Ethernet link status.
Shows MAC address of the
machine.
3
3
92