Lenovo ThinkCentre M77 Hardware Maintenance Manual page 151

8. Make sure that the new power supply assembly is the correct replacement.
9. Install the new power supply assembly into the chassis so that the screw holes in the new power supply
assembly are aligned with the corresponding holes in the rear of the chassis. Then, install the three
screws to secure the new power supply assembly in place.
Note: Use only screws provided by Lenovo.
Figure 81. Installing the power supply assembly
10. Connect the new power supply assembly cables to all drives and the system board. See "Locating
parts on the system board" on page 77.
.
Chapter 9 Replacing FRUs (Machine Types: 1996, 1997, 2002, 2010, 2208, 2209, 2221, 2224, 2226, and 2227.)
147