TYAN Tempest i5000VF S5370 User Manual page 44

Memory Branch Mode
This option is used to select the type of memory operation mode.
Interleave / Sequential / Single Channel 0
Enhanced x8 Detection
This feature is used to enable/disable enhanced x8 DRAM UC error detection.
Enabled / Disabled
Force ITK Config Clocking
This feature is used to enable/disable FBD configuration for ITK test suite.
Enabled / Disabled
Watchdog Timer
This feature allows you to enable watchdog timer.
2 Mins / 4 Mins / 6 Mins / 8 Mins / 10 Mins / Disabled
Enable Multimedia Timer
This feature is used to enable/disable Multimedia Timer support.
Yes / No
Parallel ATA
This feature is used to enable the PATA function.
Enabled / Disabled / Channel 0
Serial ATA
This feature is used to enable the SATA function.
Enabled / Disabled
Native Mode Operation
This feature is used to choose Native Mode for ATA. However, certain OS is not
supported under Native Mode.
Auto / Serial ATA
SATA Controller Mode Option
This feature is used to select SATA controller mode. In "compatible mode",
SATA and PATA drives are auto-detected and placed in Legacy mode. In
"Enhanced mode", SATA and PATA drives are auto-detected and placed in
Native IDE mode.
Compatible / Enhanced
SATA RAID Enable
This feature is used to enable the SATA RAID.
Disabled / Enabled
SATA AHCI Enable
This feature is used to enable the SATA AHCI.
Disabled / Enabled
44