Dymo LabelWriter User Manual page 39

Creating
Custom
Templates
on the labels. These options are used primarily for labels
containing only graphics. When used with text, the Flip
Horizontal check box prints the text backwards and the
Flip Vertical check box prints a mirror image. The Invert
Image check box prints a negative image.
When satisfied with your specifications, click OK or click
Cancel to close the dialog box without making any
changes.
8.
To reduce or enlarge the information to be printed on the
label, enter the desired percentage.
9.
If you've made any changes to the Page Setup dialog box,
click Settings.
10.
Click the appropriate radio button to either save the
current settings as the new user default, restore the old user
default, or restore the factory default settings.
11.
When satisfied with your Page Setup specifications, click
OK or click Cancel to close the dialog box without
making any changes.
After choosing the LabelWriter and specifying its Page
Setup, you can print any type of document from any kind
of application with a Print command. However, you must
set up your program according to its user manual for
printing to labels. For instance, if your program requires
you to set up layouts or templates, you must create one
specifically for printing to the LabelWriter. The following
pages describe how to create templates for Microsoft Word
98. For technical support on how to create templates for
FileMaker Pro and other applications, visit
www.dymo.com/support.
Printing to the LabelWriter from word processors is really
no different than printing to any other kind of printer.
Instructions for using Microsoft Word 98 follow, but as
each program is slightly different, refer to your word
processor's manual for specific help on formatting the
page.
1.
Launch Word by double-clicking its icon.
2.
If one wasn't automatically created, open a new blank
document.
Choose Page Setup from the File menu.
3.
Printing With Other Applications
35