Toshiba Portege R500 User Manual page 86

■
When you back up a DVD disc, be sure that the source drive supports
recording to DVD-R, DVD-RW, DVD+R or DVD+RW media - if this is
not the case then the source disc might not be backed up correctly.
■
When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW disc, be
sure to use the same type of disc.
■
You cannot partially delete any data written to a CD-RW, DVD-RW or
DVD+RW disc.
Data Verification
To verify that data has been written or rewritten correctly to a data CD/DVD
you should follow the steps below before you begin the write/rewrite
process:
1. Display the setting dialog box by one of the following two steps:
■
■
2. Mark the Verify written data check box.
3. Select File Open or Full Compare mode.
4. Click the OK button.
How to learn more about TOSHIBA Disc Creator
Please refer to the Help files for additional TOSHIBA Disc Creator
information.
When Using Ulead DVD MovieFactory
How to make a DVD-Video
Simplified steps for making a DVD-Video from video data captured from a
DV-Camcorder:
1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA ->
Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD
MovieFactory.
2. Insert a DVD-RW or DVD+RW disc in Burner.
3. Click Video Disc -> Burn Video to Disc to launch Direct Recording
dialog box, choose DVD-Video/+VR to invoke Straight Capture to
Disc Page.
4. Choose DVD-Video format.
5. Choose the capture source is DV.
6. Press Capture button.
User's Manual
Click the Recording settings button (
toolbar in the Data Disc mode.
Select Settings for Each Mode -> Data Disc in the Settings menu.
) for writing on the main
®
for TOSHIBA
Operating Basics
4-18