Removing The Ribbon Cassette; Inserting The Ribbon Cassette; Correcting Cassette; Removing The Correcting Cassette - Smith Corona Spellmate 500 User Manual

Removing the Ribbon Cassette

Replace the ribbon cassette when a different colored
portion begins to unwind from it.
1. Tilt sound shield toward you.
2. Grasp cassette on both sides.
3. Lift cassette STRAIGHT up and out.

Inserting the Ribbon Cassette

1. Turn the gear wheel on the bottom of the cassette in
the direction indicated to tightly wind the cassette.
2. Turn the cassette over with the name face up and
the ribbon toward the print hammer.
3. Set the cassette in the carrier while guiding the
ribbon between the printwheel and the typing
guide. Press down. Ribbon snaps into place.
4. Return the sound shield to its original position. Be
sure it snaps into place.
NOTE: Stencils designed specifically for daisywheel
typewriters perform best when the print ribbon is inserted.
To determine which brand best fits your individual
requirements, check with your office supplies retailer.

Correcting Cassette

Replace the correcting cassette when a different
colored portion unwinds from the right spool. Be sure
to use the Right Ribbon System combination.

Removing the Correcting Cassette

1. Tilt sound shield toward you, and remove the
print ribbon cassette.
2. Grasp the correcting cassette on both sides as
shown. Lift it up and out.
Smith Corona Corporation 35