Removing And Reinstalling The System Stand - Lenovo ThinkCentre M71z Hardware Maintenance Manual

6. To reinstall the system stand hinge cover, place the system stand hinge cover on the computer so that
the two plastic tabs on the hinge cover align with the corresponding holes in the computer.
Figure 6. Reinstalling the system stand hinge cover
7. Reinstall the screw to secure the system stand hinge cover to the computer.
Figure 7. Reinstalling the screw to secure the system stand hinge cover to the computer

Removing and reinstalling the system stand

Attention
Do not open your computer or attempt any repair before reading and understanding the "Important safety
information" in the ThinkCentre Safety and Warranty Guide that came with your computer. To obtain a copy
of the ThinkCentre Safety and Warranty Guide, go to:
http://www.lenovo.com/support
This section provides instructions on how to remove and reinstall the system stand.
90
ThinkCentre Hardware Maintenance Manual