SATA data cables may include a latch (underneath
NOTE:
the plug for select models only). Press the latch and pull the
plug to remove the data cable from the drive.
4 Remove the retaining screw from the drive tray.
CAUTION: Handle hard disk drives with
care. Dropping or banging the hard disk
drive could result in data loss.
5 Slide the hard disk drive tray out of the drive bay by
pulling the tab on the drive tray.
Ensure that the PC cables are clear of the drive tray
NOTE:
when removing. Push them away, as required, before
removing the tray.
6 Remove the four screws that secure the hard disk drive to
the drive tray (A) and slide out the hard disk drive out of
the tray (B).
Upgrading and Servicing Guide
11