Setting The Monitor Type - HP Model 745 - VME Workstation Handbook

Setting the Monitor Type

You can set the monitor type for a graphics adapter from the configuration menu by enter-
ing the following:
Configuration Menu: Enter command > monitor graphics(0) tt
- or -
Configuration Menu: Enter command > monitor pmcn tt
Where n is the number of the PMC site and tt is the monitor type.
To display a list of supported monitors, enter the following command;
Configuration Menu: Enter command > monitor list
A list of valid monitor types similar to the following is displayed;
MONITOR INFORMATION
Path Slot Head Type
---- ---- ---- ---- ---------
GRAPHICS(0) 0
*
GRAPHICS(0) 0
GRAPHICS(0) 0
*
GRAPHICS(0) 0
GRAPHICS(0) 0
GRAPHICS(0) 0
GRAPHICS(0) 0
*
GRAPHICS(0) 0
*
GRAPHICS(0) 0
*
GRAPHICS(0) 0
*
GRAPHICS(0) 0
GRAPHICS(0) 0
*
GRAPHICS(0) 0
GRAPHICS(0) 0
GRAPHICS(0) 0
Configuration Menu: Enter command >
* These monitor types are not supported on the Model 745 built-in graphics.
Configuration
Displaying and Setting the Monitor Type
Size
1 1 1280x1024
1 2 1280x1024
1 3 1280x1024
1 4 1280x1024
1 5 1024x768
1 6 800x600
1 7 640x480
1 8 1600x1200
1 9 1600x1200
1 10 1200x1600
1 11 1200x1600
1 12 1280x1024
1 13 1280x1024
1 14 640x480
1 15 --------user defined-------
3-18
Freq Class
---- -----
75Hz VESA
75Hz VESA, Double buffered
75Hz VESA, Greyscale
75Hz VESA, Double Buffered,Greyscale
75Hz VESA
75Hz VESA
75Hz VESA
75Hz VESA
75Hz VESA,Greyscale
75Hz VESA
75Hz VESA,Greyscale
72Hz
72Hz Double buffered
60Hz