Chapter 2. Setting Up Your Computer; Connecting Your Computer - Lenovo ThinkCentre M60e Safety And Warranty Manual

Chapter 2. Setting up your computer

Before you begin, make sure you set up your computer in the best possible work
area that suits your needs and the kind of work you do. For more information, see
the ThinkCentre User Guide or go to:
http://www.lenovo.com/healthycomputing
Note: Be sure to read and understand Chapter 1 "Important safety information"
on page 1 before you set up your computer. The precautions and guidelines will
help you work safely.

Connecting your computer

Use the following information when connecting your computer.
• Look for the small connector icons on the back of your computer. Match the
connectors to the icons.
• If your computer cables and connector panel have color-coded connectors,
match the color of the cable end with the color of the connector. For example,
match a blue cable end with a blue connector or a red cable end with a red
connector.
Note: Depending on your model type, your computer might not have all the
connectors that are described in this section.
1. Check the position of the voltage-selection switch on the rear of the computer.
Use a ballpoint pen to slide the switch, if necessary.
Note: Some computers do not have a voltage-selection switch. These
computers automatically adjust to the voltage at the electrical outlet
regardless of the country or region where the computer is being connected.
• If the voltage supply range is 100–127 V ac, set the voltage-selection
switch to 115 V.
• If the voltage supply range is 200–240 V ac, set the voltage-selection
switch to 230 V.
© Copyright Lenovo 2011
9