Installing A Computer Wall Mount; Completing The Fru Installation - Lenovo ThinkCentre M62z Hardware Maintenance Manual

3. Install the three screws to secure the WIFI card to the system board.
4. Close the system board shielding. See "Closing the system board shielding" on page 74.
5. Go to "Completing the FRU installation" on page 107.

Installing a computer wall mount

For information about how to install a computer wall mount, see the documentation that came with your
computer wall mount.
Note: When installing a computer wall mount, make sure that you leave at least a 60 mm (2.36 inches) space
between the wall and your computer for easy access to the connectors on the rear I/O assembly.

Completing the FRU installation

After replacing FRUs, you need to install any removed parts, replace the computer cover, and reconnect any
cables, including telephone cords and power cords. Also, depending on the FRU that is replaced, you might
need to confirm the updated information in the Setup Utility program.
.
Chapter 9 Replacing FRUs
107