Sansui DTV2760A Owner's Manual page 21

Setting the V-Chip
To change the password
1
Press MENU/ENTER. The menu screen appears.
2
Press or to select
menu, then press
"V-CHIP".
3
Press to display the password
entering mode. Use the number
buttons (0-9) to enter your password,
then press MENU/ENTER.
The V-CHIP menu appears.
4
Press or to select "CHANGE
PASSWORD", then press
5
Enter a new password using the
number buttons (0-9), then press
MENU/ENTER.
6
Enter the same password again to
confirm, then press MENU/ENTER.
7
Press MENU/ENTER repeatedly until the menu screen is cleared.
Otherwise, press EXIT to return to the normal screen immediately.
(OPTION)
or to select
.
(continued)
21