Changing The Spin Speed/Selecting The Rinse Hold Function - AEG OKO-LAVAMAT 76640 update User Information

Changing the spin speed/Selecting the rinse
hold function
If required, change the spin speed for the final
spin/select rinse hold:
Changing the spin speed
Continue pressing the spin speed/RINSE HOLD but-
0
ton until the indicator for the desired spin speed is
illuminated.
If you do not change the spin speed, the final spin
3
will be adjusted automatically depending on the
type of wash cycle:
– COTTONS/LINEN
– EASY-CARES/EASY IRON
– DELICATES
– WOOL/P (hand wash)
The speed for the intermediate spin cycle is dependent on the wash cy-
cle selected and cannot be altered.
Selecting the rinse hold function
0 Continue pressing the spin speed/RINSE HOLD button until the RINSE
HOLD indicator is illuminated.
If RINSE HOLD is selected, the washing will remain in the final rinse wa-
3
ter and will not be spun.
The washing will not be spun throughout the entire wash cycle. As a re-
sult the cycle is a very quiet one. RINSE HOLD is therefore especially
suitable for washing at night.
Note: The laundry remains lying in the water until you drain or spin
(see section "Ending a wash cycle"). After 18 hours however, it is auto-
matically drained and pumped.
Operating Instructions
1600 revolutions per minute
900 revolutions per minute
700 revolutions per minute
900 revolutions per minute
19