Selecting The Video Output Signal Mode - Casio QV-4000 Images Manual

1.
Use the video cable to connect the camera to
the television as shown in the illustration.
2.
Perform the required operation on the TV to set
it up for video input.
• See the documentation that comes with your televi-
sion for information about how to do this.
3.
Perform normal playback and recording opera-
tions on the camera.
IMPORTANT!
• Icons and other indicators that normally appear on the
camera's monitor screen will also appear on the
screen of the connected TV.
CONNECTING TO EXTERNAL EQUIPMENT

Selecting the Video Output Signal Mode

Your camera supports both NTSC (used in U.S., Japan, and
other countries) and PAL (used in Europe and other areas)
video output signal systems. The video system you should
use depends on the country of origin of the equipment you
are connecting to the camera's VIDEO OUT terminal.
IMPORTANT!
1.
2.
3.
4.
5.
E-137
• When you have PAL selected as the video signal out-
put mode, the monitor screen is turned off when you
connect the cable to the VIDEO OUT terminal.
Align the power/function switch with
Press MENU.
Select "Video Out" and then rock the control
button to the right.
Select "NTSC" or "PAL" and then click the
control button to apply it.
Press MENU to exit the setting procedure.
or .