Settings; System Setup - Samsung BD-C6800 User Manual

3.
The General Disclaimer screen appears. Use
the ◄► buttons to move to Agree, and then
press the ENTER button.
NOTE
▪
Screens can take a few seconds to appear.
4.
The Internet Privacy Policy screen appears.
Use the ◄► buttons to move to Agree, and
then press the ENTER button.
5.
The Service Update screen appears and
installs a number of services and applications.
When done, it closes. The applications
and services downloaded are listed on the
Internet@TV screen.
NOTE
▪
Internet@TV may close momentarily during the
installation process.
▪ A number of screens appear after installation. You
can press Enter to close them or let them close on
their own.
6.
To start an application, use the ▲▼◄►
buttons to highlight the application, and then
press the ENTER button. The application
starts.
Account Login
For a more enjoyable application experience,
register and log in to your account.
To do this, you must create an account first.
(For instructions on creating an account, refer to
Internet@TV ID on page 58.)
1.
Press the ▲▼◄► buttons to select the
desired application and press the RED (A)
button.
2.
Enter your user account and password.
Recommended
Login
My Applications
User account :
Password :
Create [0~9] Enter PIN ' Cancel
a
Samsung Apps Settings
Login
a b
by Date 1/3
aaa
Mark as Favorite Sort by ' Return
d

Settings

Create IDs and configure Internet@TV settings
on this screen. To accesss the Settings screen,
click the Settings button on lower left of the main
Internet@TV screen.
Settings

System setup

 Change the Service Lock password
 Internet@TV ID
Reset
 Service Manager
 Properties
System Setup
Change the Service Lock password
The Service Lock password function lets you set
a password that you can then use to establish
password controlled access to Internet@TV
services such as Netflix and Blockbuster. After
you have set the password, you then set a service
to locked or unlocked on the Service Manager
screen. When a service is locked, you must enter
the Service Lock password to access it.
To use the Service Lock function, follow
these steps:
1. Highlight Change the Service Lock password
on the Settngs screen, and then press the
ENTER button.
2.
On the screen that appears, enter the current
password. If this is the first time you are using
the Service Lock function, enter the default
password, 0-0-0-0, using your remote. The
next screen appears.
3.
On the next screen, enter a new, four digit
password on the first line. Enter it again on
the second line to confirm.
4.
The Changing Password Complete message
screen appears. Press the ENTER button or
wait for the screen to close - about 5 seconds.
' Return

English