Table of Contents
Advertisement
AT Commands: Information and Status
Raven EDGE/GPRS for Cingular - User Guide, version 2.31
•
Hardware Reset
The hardware module is being reset. This is a temporary state.
&V
View active profile (the contents of the active registers).
Not displayed with Wireless Ace.
+CCID
Subscriber Identity Module ID
+CIMI
International Mobile Subscriber Identity
+ICCID
Subscriber Identity Module ID
+RCIQ
Current Cell Info
Information Displayed in Wireless Ace without AT Commands Listed
•
Bytes and Packets Received and Sent
Network traffic for the applicable port.
•
Number of System Resets
Counter of the number of system resets over the life of the modem or since the configuration
was reset.
•
Bad Password Count
Counter of the number of bad password attempts.
•
IP Reject Count or Log
Rejected IP Data.
•
Versions of ALEOS, internal hardware, boot, and MSCI
Versions of internally configured hardware and software.
60
Advertisement
Table of Contents
