HP Kayak XA 05xx Troubleshooting Manual page 19

HP Kayak XA 05xx PC Workstation —Troubleshooting Your HP PC Workstation
If the Date and Time Are Incorrect
The date and time can be incorrect for the following reasons:
The time has changed to reflect the beginning or end of Summer
•
Time
The PC Workstation has been unplugged from the mains for too long
•
and the battery is discharged.
The on-board battery automatically recharges itself as soon as the
PC Workstation is plugged into a power outlet.
To change the date and time, use your operating system utilities or the
Setup program by pressing
If You Have a Network Problem
If you have a problem with your PC Workstation's network, run the
HPIEDIAG utility provided on the HP CD-ROM that contains the LAN
drivers, supplied with your PC Workstation. This utility should be run
from a minimal DOS system, without any LAN drivers loaded—achieve
this by booting from a system floppy disk. (If your PC Workstation is
running Windows NT 4.0, you will need to create this system floppy
disk on another PC.)
1 Insert the system floppy disk in the floppy disk drive and re-boot
your PC Workstation.
2 Insert the CD-ROM containing the HPIEDIAG utility in the CD-ROM
drive.
3 Make the CD-ROM drive the current drive by typing, for example,
if D is the letter of your CD-ROM drive.
D: Enter
4 Change to the DIAG directory by typing:
5 Start the HPIEDIAG utility by typing:
instructions on the screen.
Then check the configuration of the integrated Ethernet interface
using the Setup program. Refer also to the Network Administrator's
Guide downloadable from HP's Web site at
http://www.hp.com/go/kayaksupport
If Your PC Workstation Has a Software Problem
at startup.
F2
CD\LAN\DIAG Enter
HPIEDIAG
.
. Follow the
English
19