Manual Storing Of Station Presets - Alpine TDM-7546E Owner's Manual

1
B.SKIP
CT
12
1 2
P.S. DN P.S. UP
4 5
H M
Radio Operation
Manual Storing of Station
Presets
1. Tune in a desired radio station you wish
to store in the preset memory.
2. Press and hold any one of the preset
buttons (1 through 6) for at least 2
seconds. The station frequency will start
blinking.
3. Press the preset button into which you
3
wish to store the station while the display
is blinking (within 5 seconds).
The display stops blinking to indicate that
6
the station has been memorized. The
preset number is also displayed.
4. Repeat the procedure to store 5 other
stations onto the same band.
Use this procedure for other bands.
A total of 24 stations can be stored in the preset
memory (6 stations for each band FM1, FM2,
AM and D.A.P.).
Note: If a preset memory has already been set
in the same preset location, it will be
cleared and the new station will be
memorized.
English