Bunn VP17 Series Illustrated Parts Catalog page 13

ITEM PART NO.
1 12921.0000
2 12920.0000
12920.0002
3 13352.0008
02301.0000
00973.0000
4 22295.0000
22295.0001
22295.0002
22295.0012
22295.0015
22295.0016
22295.0017
22295.0018
5 25105.0000
25105.0003
25105.0004
6 12984.0002
12984.0004
12985.0000
27691.0001
27730.0000
7 04243.0000
8 40763.0001
28004.0000
28355.0000
9 23696.0000
10 23697.0000
11 25102.0000
25102.0001
12 27705.0000
01327.0000
13 00824.0001
14 03628.0000
13307.1001
15 01685.0000
16 05746.1000
17 01686.0000
18 02337.0001
19 00824.0000
ELECTRICAL AND OPERATING CONTROLS
QTY. DESCRIPTION
2-4 Switch Blank, BLK
1-3 Switch ON/OFF 120V
1-3 Switch, ON/OFF 240V
1 Control Panel
4 Screw, Phillip Pan Head #6-32 x .625"
4 Nut , Keps #6-32
1 Label, Switch ON/OFF (One warmer brewer)
1 Label, Switch ON/OFF (Two warmer brewer)
1 Label, Switch ON/OFF (Three lower warmer brewer left or right)
1 Label, Switch ON/OFF (One Lower Warmer & Two Upper Warmers)
1 Label, Switch ON/OFF (One warmer brewers)
1 Label, Switch ON/OFF (Two warmer brewers)
1 Label, Switch ON/OFF (Three lower warmer brewers, left or right)
1 Label, Switch ON/OFF (One lower, and two upper warmer brewers)
1 Decal, Control Panel (W/Ready Light)
1 Decal, Control Panel (W/Ready Light) ("B" Models Only W/Front Heater Switch)
1 Decal, Control Panel (No Light, No Switch)
1 Light Assembly, 120V (Includes Terminal Housings)
1 Light Assembly, 240V (Includes Terminal Housings)
1 Wiring Harness, Ready Light
1 Ready Light, Green 240V ("A" Models only) Used in place of switch blank
1 Wiring Harness, Ready Light ("A" Models only)
2 Terminal Housing, Receptacle
1 Switch, Heater (SPST ) (Includes Hex Nut) Front or Rear Mount
1 Switch, Heater (DPST) (Includes Hex Nut) (Rear Mount "A" Models only)
1 Harness Assy, (For use with 28004.0000 Heater Switch)
1 Nut, Hex
1 Facenut, Plastic
1 Bracket, Switch Indicator/Guard
1 Bracket, Switch Indicator/Guard (CE)
1 Terminal Lug (Includes setscrew)
1 Screw, Pan Head #10-32 x .38"
1 Decal, Equipotentiality (CE Only)
1 Receptacle, Grounded (Not Used on Brewers with Three Warmers)
1 Wiring Harness, Rear Receptacle
1 Connector, Cord .50" MPT ("B" Models)
1 Bushing, Strain Relief ("A" Models)
1 Bushing, Strain Relief
1 Screw, Hex Head #10 x .375" (Cord Ground)
1 Decal, Ground
(Continued)
13
"A"
Models
only
10861.2 092011