Zte F152 User Manual page 32

Set the Owner name
The owner name is displayed on the Idle Screen.
• From the Idle Screen press the OK Key for the Main Menu.
• Press the Down Arrow then the Left Arrow for Settings, press OK.
• Go to 4) for Owner Name.
• Type your name and press the OK Key to save.
Disable or change the PIN Number
• From the idle screen press the OK key for the Main Menu.
• Press the Down Arrow then the Left Arrow for Settings, Press the OK Key.
• Press the Right Arrow Key Three times for Security.
• Press OK to Select Activate Security Codes.
• Press OK to Select PIN code.
• Switch ON or OFF and enter the PIN number to confirm.
• To change the PIN Number select Change Security Codes.
• Press OK to Select PIN code.
Notes on PIN Codes
• PIN Code is provided by Telstra.
• PIN2 Code is an additional PIN on your (U)SIM card and is not normally used.
• Handset Lock is an additional PIN code used when you switch on the phone.
• If you forget your Handset Lock code your handset will need to be repaired and you will
lose your content. It cannot be reset after it is locked.
32