Canon LBP-1760 Service Manual page 118

CHAPTER 3
5. Multi-purpose tray
1) Open the front cover.
2) Spread the sides of the front cover
slightly to the outside and remove the
multi-purpose tray from the front cover.
Then slide the front cover to the right to
remove it.
Front cover
Figure 3-1-8
3) Remove the stopper from the multi-pur-
pose tray.
4) Pull down the left side of the multi-pur-
pose tray, then slide it to the left side to
remove.
Stopper Multi-purpose tray
Figure 3-1-9
3 - 4
6. Right cover
1) Remove the right rear cover and top
cover unit.
2) Unhook the claw and remove the right
cover.
Claw Right cover
Figure 3-1-10
<Precautions on reassembly>
Be sure to attach the rod to the hole of the
switch button on the right cover when
installing the right cover.
Switch button Rod
Figure 3-1-11