Timer Programming - Panasonic Viera ST50A series Operating Instructions Manual

Timer Programming

Timer Programming from Menu
The Timer Programming menu allows you to choose programmes that you want to remind watching or record to the
USB HDD or the SD Card. At the correct time, the TV will tune to the correct channel even if the TV is in Standby
mode.
TV Guide may also be used to set timer programming event (p. 25).
●
This function is not available in Analogue TV mode.
● Timer Programming can store up to 15 events.
● Timer Programming only works reliably if correct time information is received via the signal from the broadcaster or
service provider.
●
For recording using Timer Programming, the TV must be either on or in Standby. For reminders to be displayed, the
TV must be on.
● No other channel can be selected while the recording of Timer Programming is in progress.
●
Recording an encrypted (copy-protected) programme may not be possible.
●
For more information of the USB HDD / SD Card Recording
●
2 minutes before the starting time, a reminder message appears if you are watching TV.
To remove the message and start the programming
•
Select Digital TV mode
1
(p. 20)
Display the menu and select [Timer]
2
Select [Timer Programming]
3
Timer Programming
Off Timer
Auto Standby
52
Timer
Access
Off
Off
(p. 60, 99)
To cancel the programming
•
select
access
select
access