Registering The Loading Orientation - Canon Satera LBP9500C User Manual

Registering the Loading Orientation

Specify [
the loaded paper.
IMPORTANT
Be sure to match the setting in the printer driver.
Match the paper type specified in the
Size] in the printer driver.
If they do not match, the message <
In this case, the setting for [
by pressing [
For users who do not use the printer driver
When you are printing from an operating system on which you cannot use the printer
driver (such as MS-DOS and UNIX), match the setting for [
size of the loaded paper.
When [

The printer performs printing without checking the paper settings in the printer driver.
Make sure that the paper specified in the printer driver matches that loaded in the
multi-purpose tray before using the printer.

Load paper whose long edges are 297.0 mm or less in portrait orientation (when the
short edges of the paper are parallel to the front side of the printer) if you use the LIPS
LX printer driver.
1
Press [
2
Select [
press [OK].
84
] using the control panel according to the orientation of
] ( ), allowing you to continue printing.
] is specified
] ( ).
menu and that specified in [Output
> appears.
] is changed to that in the printer driver
] using [ ] and [
] and the
], and then