■ Envelope
The envelopes that can be used with this printer are YOUGATA No. 4 and YOUGATA No. 2
with the following structures only.
Load the envelopes with the address side (non-glued side) facing down in the
multi-purpose tray.
YOUGATA No. 4 (105 mm x 235 mm)
IMPORTANT
Do not use the following types of envelopes. Using inappropriate envelopes may result in
•
paper jams that are difficult to clear or may result in damage to the printer.
- Envelopes with fasteners or snaps
- Envelopes with address windows
- Envelopes with adhesive on the surface
- Wrinkled or creased envelopes
- Poorly manufactured envelopes in which the glued parts are uneven
- Irregularly-shaped envelopes
Before loading the envelopes, flatten the stack of envelopes to release any remaining air,
•
and press the fold lines along the edges tight.
Do not print on the reverse side (glued side) of envelopes.
•
When loading the envelopes, load them so that the flap is toward the left of the printer
•
when viewed from the front.
(
Printing speed drops when printing envelops.
•
NOTE
When printing envelopes, they may be creased.
14
* You cannot use envelopes that have a flap on the short edge.
: Feeding direction)
YOUGATA No. 2 (114 mm x 162 mm)