Operation; Function Setting - Canon BJC-85 Reference Manual

5. OPERATION

5-1. FUNCTION SETTING

Default setting
The default setting can be set by button operation when the power is turned on. When the
printer is turned on, hold down the POWER button until the beeper sounds the specified
number of times for the desired function setting, and release the POWER button to set.
<Difference from the BJC-80>
BJC-85
1) No setting regarding the BJ mode
2) The setting to enable/disable the ink low warning is added.
3) The setting of Euro font is added.
Print mode
Left margin
Text scale mode
Paper feed position
Smoothing
Reduction
Automatic power off
Font
Font lock
Input/download buffer
Automatic line feed
International character set
Character set
Code page
Ink low warning
When the printer is turned on, hold down the POWER button until the beeper sounds
12 times to change "Code Page" in the following table to "858," "Character Set"
to"Graphics." Other items will not be changed.
Function Setting
Mode Beeper
Table 1 7 times
Table 2 8 times
Table 3 9 times
Table 4 10 times
Table 5 11 times
Table 1 Table 2
HQ
LTR
Disable Disable
8.5 mm 8.5 mm
Disable Disable
1/1
Disable Disable
Roman Roman
Disable Disable
25 kB/0 kB 25 kB/0 kB 25 kB/0 kB
CR
USA
Italics Italics
437
Disable Enable
Remark
Factory default setting
Table 3
HQ HQ
LTR A4
Disable
8.5 mm
Disable
1/1 1/1
Disable
Roman
Disable
CR CR
USA USA
Italics
437 437
Disable
8
Table 4 Table 5
HQ HQ
A4 A4
Disable Disable
8.5 mm 8.5 mm
Disable Disable
1/1 1/1
Disable Disable
Roman Roman
Disable Disable
25 kB/0 kB 25 kB/0 kB
CR CR
USA USA
Italics Graphics
437 858
Disable Disable