Changing Over The Freezer Compartment Door - AEG SANTO U 66040i Operating And Installation Instructions

After completion
Warning!
10
of the door reversing opera-
tion, check that the door
13
gasket adheres to the cabi-
net. If the ambient temper-
ature is cold (i.e. in Winter),
the gasket may not fit per-
fectly to the cabinet. In that
9
case, wait for the natural
fitting of the gasket or
12
accelerate this process by
heating up the part involved
with a normal hairdryer on
11
a low setting.
3

Changing over the freezer compartment door

Open the freezer compartment door a little way.
Using a small screwdriver, press the spring in
the opening of the lower door bearing
slightly upwards and take the door bearing
out complete with the door.
Position the covering cap (M) on
the opposite side.
Turn the freezer compartment door
through 180° and fit the lower door
bearing into the lower bearing
cavity of the freezer compartment
door.
Lift the freezer compartment door
a little way upwards, fit it into the
M
upper door bearing, and at the
same time insert the lower door AEG43
bearing into the square hole. Small upwards and downwards
adjustments of the freezer compartment door will make fitting easier.
9