Table of Contents
Advertisement
Red warning light flashing, warning tone
sounding
Temperature display shows a square.
The compressor runs continuously
The light does not come on.
Water on the floor or on storage shelves.
Noise
The compressor does not start
immediately after changing the
temperature setting.
If after the above checks there is still a fault, call your local AEG Service
Force Centre.
In-guarantee customers should ensure that the above checks have been
made as the engineer will make a charge if the fault is not a
mechanical or electrical breakdown.
Please note that proof of purchase is required for in-guarantee service
calls.
28
Symptom
Solution
Temperature warning
Please look at "Temperature warning"
section.
There is a function fault.
Please inform your local Service Force
Centre. Do not open the door of the
appliance again.
Adjust the temperature regulator to give
correct temperature control.
Check that the door is closed.
Large quantities of food have recently
been placed in the cabinet and/or door is
frequently opened.
Check that air ventilation is not
obstructed.
Ensure the bulb is correctly fitted.
Replace the bulb if it has blown.
Check the door light switch is not
jammed.
Water drain hole is blocked.
See the "Cleaning and Maintenance" sec-
tion.
Refer to Normal Operating Sounds
This is normal, the compressor starts after
a period of time.
818 35 69-01/4
Advertisement
Table of Contents
