Table of Contents
Advertisement
Recommended settings:
For normal use: position "1" to "2";
For lower temperatures: position "2" to "3".
Important!
High ambient temperatures (e.g. on hot summer days) and a cold
setting on the temperature regulator (position "3" to "4") can cause the
compressor to run continuously in order to maintain the low
temperature.
The fridge will therefore not be able to defrost as automatic defrosting
of the fridge is only possible when the compressor is not running (see
"Defrosting" section). The result is the build up of a thick layer of frost
on the fridge rear wall.
If this happens, turn the temperature regulator back to a warmer
setting (position "2" to "3"). At this setting the compressor will be
switched on and off as usual and automatic defrosting will restart.
Switching the Appliance off
0
1. To switch off, turn the temperature regulator to position "
power light goes out.
If the appliance is not to be used for an extended period:
0
1. Switch off the appliance. To do this turn the temperature regulator to
position "
•
2. Unplug or switch off at the mains supply.
3. Clean thoroughly (see section: "Maintenance and Cleaning").
4. Leave the door open to avoid the build up of odours.
818 17 80-00/1
". The mains power light goes out.
". The mains
•
17
Advertisement
Table of Contents
