Lenovo ThinkPad Edge L330 Hardware Maintenance Manual page 71

When installing: Plug the blue cable into the connector marked MAIN, and the red cable into the connector
marked AUX on the card.
Removal steps of mSATA solid-state drive
Attention:
• Do not drop the drive or apply any physical shock to it. The drive is sensitive to physical shock. Improper
handling can cause damage and permanent loss of data.
• Before removing the drive, have the user make a backup copy of all the information on it if possible.
• Never remove the drive while the computer is operating or in suspend mode.
• After installation of a new drive, go to http://www.lenovo.com/support for instructions on configuring the
drive.
.
Chapter 9 Removing or replacing a FRU
65