Charging And Recording Time - Panasonic HC-V10 Operating Instructions Manual

≥ If you do not intend to use the unit for an extended period, disconnect the USB cable from
the unit for safety.
≥ Charging may not be possible depending on the operating environment of the PC being
used (such as custom-made PC).
≥ Charging will stop when turning the power of the PC off or forcing it into sleep mode. Charging
will start again when turning the power of the PC on again, or waking from sleep mode.
≥ The unit will be charged if it is connected to a Panasonic Blu-ray disc recorder or DVD
recorder with a USB cable, even if the power is turned off.
≥ We recommend using Panasonic batteries (l 6, 7).
≥ If you use other batteries, we cannot guarantee the quality of this product.
≥ Do not heat or expose to flame.
≥ Do not leave the battery(ies) in a car exposed to direct sunlight for a long period of time
with doors and windows closed.

Charging and recording time

∫ Charging/Recording time
≥ Temperature: 25 oC/humidity: 60%RH
≥ Time in the parenthesis is charging time when this unit is connected to a PC, Panasonic
Blu-ray disc recorder, or DVD recorder.
Battery model number
[Voltage/Capacity
(minimum)]
Supplied battery/
VW-VBL090 (optional)
[3.6 V/895 mAh]
≥ These times are approximations.
≥ The indicated charging time is for when the battery has been discharged completely.
Charging time and recordable time vary depending on the usage conditions such as
high/low temperature.
≥ The actual recordable time refers to the recordable time when repeatedly starting/stopping
recording, turning the unit on/off, moving the zoom lever etc.
≥ The batteries heat up after use or charging. This is not a malfunction.
Battery capacity indication
The display changes as the battery capacity reduces.
# #
When the charge runs out,
Charging
time
2 h 10 min
(3 h)
# #
flashes red.
Recording continuously
mode
[1280k720/50p]
[iFrame]/
[640k480/50p]
Maximum
Actual
recordable
recordable
time
time
1 h 25 min 40 min
1 h 40 min 50 min
11
VQT4C40