Brother DP-525CJ Service Manual page 79

REPAIR
SERVICE MANUAL
Troubleshooting
The following printing pattern is printed:
LM RM
1 inch
6.4 inches
[Memory Codes 21(H) to 7E(H) printed]
•
The serial number is printed on the first line (if it was entered), and then 59 lines of
characters are printed at 64 characters per line; with each line beginning with one
character from the right of the previous line.
If the CANCEL is pressed while the serial number input screen is displayed, the input
character string will not be registered as a serial number and display will return to the
Main Menu screen.
If the SPACE BAR or CANCEL key is pressed during printing, self printing is
suspended and the pop-up screen shown below is displayed:
OK to cancel printing?
Use cursor to select and press RETURN.
[YES]
[NO]
If RETURN is entered while the cursor is located at "YES", self-printing is canceled and
the display returns to the Main Menu.
If RETURN is pressed while the cursor is located at "NO", self-printing is resumed.
3-16