Service Mode - Brother HL-2600CN Service Manual

3.3

Service Mode

Service mode is a unique mode for the maintenance of the printer only, without the video
controller card. In this mode, you can check the operation status of the printer engine Off-
line and also carry out maintenance work for each of the printer components.
Procedure
1) Hold down the Secure Print, Back, Set buttons and turn the printer Power on.
2) Using the -, Reprint, Back and Set buttons, select the mode necessary for the
maintenance work from the test list shown in Table 5-2.
How to designate the necessary mode
1) Press the Back or Set button so
that service modes (a), (b) and (c)
show up in sequence to be
selected.
2) After selecting the desired mode,
execute the selected mode by
pressing the Reprint button.
3) Press the - button to exit the
mode.
SERVICE MODE
(a)
TEST PRINT
SERVICE MODE
(b)
NEXT CARE INFO
SERVICE MODE
(c)
FACTORY MODE
V-18