Make Movie; Recording Vhs Video Files Direct To Dvd - HP Pavilion a600 - Desktop PC Getting Started Manual

Make Movie

This is the final step of your DVD project. You select a format, the type of TV
system, and volume name.
1 If your project is already open, click the Make Movie button and skip to step 5.
2 Click Start, choose All Programs, Video, InterVideo WinDVD
Creator, and then click InterVideo WinDVD Creator again.
3 Select the Open existing project button and select your project.
4 Click the Make Movie button.
5 Insert a blank recordable DVD or CD into your drive.
6 Choose one from each of the following sections (order of selections may differ):
Format Select one of the formats to record your project.
TV System Select between NTSC and PAL for your TV system. The NTSC
format is used in North America, and the PAL format is used in
European and Asian countries/regions.
Volume Name Enter a Volume name for your disc (optional).
of Disc
Select Device Select the device that contains the blank recordable DVD or CD.
Burning Select the speed to use when recording your project.
Speed
Burn to Disc Select where you would like the file to be recorded:
•
•
7 Click Start.
8 Click OK.

Recording VHS Video Files Direct to DVD

To record VHS video files direct to DVDs:
1 Connect your VCR or other analog video source to your capture card.
2 Click Start, choose All Programs, Video, InterVideo WinDVD
Creator, and then click InterVideo WinDVD Creator again.
3 Select the Record video tape into DVD disc in one step button.
4 Insert a blank DVD into your drive.
5 Click the Capture button and select your VCR.
6 Press the Playback button on your VCR.
7 Click the Record button when the preview window displays what you want to
record.
Burn to Disc: Use this to burn directly to a DVD or CD.
Write content to hard disk for later burning: Use this
to create the file on your hard disk.
Creating DVD Movies
69