Building In - Electrolux ERN 1673 Instruction Booklet

Building in

Dimensions of the recess
Height of housing (1)
Depth of housing (2)
Width of housing (3)
PR0
It is necessary that the
recess with the following dimensions:
Depth 50 mm
50 mm
D526
For appropriate venting, follow indications in the
figure.
14
ERN 1673 ERN 2372
mm 880 1225
mm 550 550
mm 560 560
3
1
2
cabinet has a ventilation
Width 540 mm
min.
200 cm 2
D022
1. Fit the appliance in the niche by making sure that
it stands against the interior surface of the unit on
the side where the door hinges of the appliances
are fitted. Insert the appliance until the upper strip
butts up against the unit (1) and make sure that
the lower hinge is in line with the surface of the
unit (2).
D132
2. Press in the joint covers between the appliance
and the kitchen furniture.
3. Open the door and push the appliance against the
side of kitchen furniture opposite to that of
appliance hinges. Fasten the appliance with 4
screws (I) provided in the kit included with the
appliance.
1
2
I
the